Lithium Battery for Electric Motorcycle
CERAMAX Lithium Power Battery for Electric Motorcycle provides constant discharge at higher output power, thereby increases the driving power of the motorcycle. High power density of Lithium battery means larger volume for the battery, so the electric motorcycle can drive a longer distance. At the same time, with fast-charging, the battery can be quickly recharged to 80% of its capacity in 30minutes. Through the intelligent BMS system, users can monitor the status of the battery, which prevents overcharging and over-discharging of the battery, prolongs the life of the battery.
- Electric Motorcycle can last up to 3-6 years if they are properly cared for and maintained when they are not in use.
- To get the longest life out of your electric motorcycle batteries recharge them after every ride, even very small rides. After short rides you may recharge the batteries immediately, however after long rides wait around 30 minutes to let the batteries cool down before recharging. Leaving an electric motorcycle battery in a partially discharged state for more than a short amount of time lowers the useful life of the battery.
- When replacing electric motorcycle batteries replace all of the batteries at the same time and with the same brand of batteries.
- When an electric motorcycle is in storage recharge the batteries at least every 30 days.
- Do not throw your old motorcycle batteries in the trash. Drop them off at a local recycling center or auto parts store for proper disposal.
Various Plugs for You to Choose
Nominal Voltage | 24V / 48V / customizable |
Ampere-hour Capacity | 60Ah / customizable |
Nominal Capacity | 1.536kWh / 3.072kWh |
Working Voltage | 20V-29.2V / 40V-58.4V |
Continuous Discharging Ratio | 60Ah 1C |
Peak Discharging Ratio | 240Ah 3C |
Continuous Discharge Current | 60A |
Peak Discharge Current | 240A(15sec) |
Continuous Charge Current | ≤60A |
Recommended Charge Voltage | 27.6V / 55.2V |
Cycle life @80% DOD | ≥3500 times |
Self-Discharge per Month @ 25℃ in OFF mode | 2.80% |
Charge Temperature | 0℃ to 55℃ |
Discharge Temperature | -30℃ to 65℃ |
Storage Temperature | -20℃ to 35℃ |
Optimal Humidity | -25% to 35% |
Water/Dust Resistance Rating(IP) | IP56 |
Check Ceramax Energy Factory
Check Ceramax Testing Equipment
Check Ceramax Package & Delivery
Check Ceramax Certification
